Ultrasound probes • biopsy guides • repair assessment
MODEL-SPECIFIC PRODUCT ENQUIRY
Akicare MG1000 Anaesthesia Multigas Sidestream Analyzer
Portable anaesthesia sidestream analyzer for CO2, N2O, and anaesthetic agents, with battery power and RS-232 output.
- Exact system and model compatibility is confirmed in the written quote
- Condition and current availability stated in the quote
- Test scope, timing and shipping confirmed per request
Catalogue content is a product reference, not a universal compatibility, inventory or delivery guarantee.
Product details
The Akicare MG1000 is a portable anaesthesia multigas sidestream analyzer listed for procurement teams sourcing portable multigas analysers. It measures inspired and expired gas concentrations and respiratory rate in real time. The unit is designed for low tidal volumes with high breath rates across a range of clinical settings.
The analyzer displays readings on a 5-inch colour LCD screen with 480×272 resolution. It uses non-dispersive infrared (NDIR) technology with no moving parts. Gas measurement covers CO2, N2O, and three anaesthetic agents (ISO, ENF, SEV) with specified accuracy ranges. Respiratory rate is measured from 3 to 150 breaths per minute. The device operates on a rechargeable built-in lithium battery, providing over 8 hours of continuous work.
Configuration options include the handheld MG1000 unit. Sibling models such as the AG120, AG200, and MG2000 may be available through the supplier. Accessories and ordering terms are confirmed per enquiry; no standard delivery time or commercial conditions are implied in this catalogue record.
More Anaesthesia Gas Analysers models are listed in the Medical Equipment catalogue for comparison; send an enquiry for configuration and terms.
| Sample Rate | 100 mL/min, ±10mL/min |
|---|---|
| Principle of Operation | Non-dispersive infrared (NDIR), no moving parts |
| Initialization Time | 20 sec, full specifications within 60 sec |
| Calibration | No routine user calibration required |
| Respiratory Rate Range | 3 to 150 Breaths Per Minute (BPM) |
| Respiratory Rate Accuracy | ±1 breath |
| CO2 Range | 0 – 10% |
| CO2 Accuracy | ± (0.2 vol% +2% of reading) |
| N2O Range | 0 – 100% |
| N2O Accuracy | ± (2vol% +2% of reading) |
| Interface | RS-232 operating at 9600 bps |
| Voltage Requirements | 5.0 VDC ±5% |
Frequently asked questions
What gases does the MG1000 measure?
The MG1000 measures CO2, N2O, and anaesthetic agents ISO, ENF, and SEV. Measurement ranges and accuracy are specified in the technical data. It also measures respiratory rate from 3 to 150 breaths per minute.
What are the power options?
The unit has a rechargeable high-capacity built-in lithium battery, providing over 8 hours of continuous operation. It also requires a 5.0 VDC ±5% power supply. Power consumption is less than 5 watts typical.
Are accessories or other models available?
The catalogue lists the MG1000 as a handheld unit. Sibling models AG120, AG200, and MG2000 may be available. For confirmed accessory options and compatibility, contact the supplier with your enquiry.
How are ordering terms determined?
All commercial terms, including pricing, lead time, and delivery, are agreed per enquiry. Submit your requirements to the supplier to receive a formal quotation with applicable conditions.
Before ordering
Confirm the host system
Provide the system model and software or connector details when relevant.
Request current photos
Ask for model-specific photos and the stated condition of the offered item.
Review the quote scope
Check condition, compatibility, testing, timing and shipping before approval.
RELATED CATALOGUE ENTRIES
Compare nearby models before requesting a final match.
PRODUCT INQUIRY
Confirm this model against your system.
Include the system model, required condition or service, quantity and destination.