Akicare MG2000 Anaesthesia Multigas Analyzer

The Akicare MG2000 is a multigas analyzer designed for continuous, real-time measurement of inspired and expired gas concentrations and respiratory rate. It is listed for procurement teams sourcing multigas analysers. The unit is specified for low tidal volumes with high breath rates.

The MG2000 uses non-dispersive infrared (NDIR) sensing with no moving parts. It measures CO2, N2O, and the anaesthetic agents ISO, ENF, HAL, DES, and SEV. Respiratory rate range is 3 to 150 breaths per minute with an accuracy of ±1 breath. Data output is via an RS-232 interface at 9600 bps. Power is supplied at 5.0 VDC ±5% with typical consumption under 5 watts; a rechargeable built-in lithium battery provides continuous operation for over 8 hours.

This catalogue entry covers the MG2000 analyzer unit. Configuration options and accessories are confirmed at the enquiry stage. Related analyser models within the supplier range include the AG120, AG200, and MG1000, which may be referenced for alternative specifications. The supplier can confirm availability, packaging, and commercial terms per order; no standard lead times are published in this catalogue record.

More Anaesthesia Gas Analysers models are listed in the Medical Equipment catalogue for comparison; send an enquiry for configuration and terms.

Frequently asked questions

Which gases and agents does the MG2000 measure?

The MG2000 measures CO2, N2O, and the anaesthetic agents ISO, ENF, HAL, DES, and SEV. Measurement ranges and accuracies are listed in the technical specifications. The device also measures respiratory rate from 3 to 150 breaths per minute.

What are the power and battery options?

The unit operates on 5.0 VDC ±5% with typical power consumption under 5 watts. It includes a rechargeable high capacity built-in Li battery specified for continuous operation over 8 hours. No external power supply details are listed in this catalogue record.

Does the MG2000 require user calibration?

No routine user calibration is required. The unit compensates automatically for atmospheric pressure and temperature. Initialization takes 20 seconds, with full specifications achieved within 60 seconds.

How do I order or confirm configuration for the MG2000?

All configurations, accessories, and commercial terms are handled on an enquiry basis. Please contact the supplier with your specific requirements. Order quantities, pricing, and delivery terms are not pre-published and are confirmed per order.