A Vinno A2-5C biopsy guide is a bracket that clamps onto the Vinno A2-5C convex transducer and holds a biopsy needle on the path displayed by the ultrasound system’s guideline software. The Akicare reusable guide for this probe — model JSM-050 — is machined from medical-grade stainless steel, offers three selectable needle angles, accepts 11–23G needles, and is sterilised between patients; disposable alternatives arrive sterile and are discarded after one procedure. Because the bracket is shaped to one specific probe housing, the purchasing decision that matters most is confirming exact model compatibility before you order.
What the A2-5C Guide Is Used For
The A2-5C is a curved-array transducer used for abdominal and OB/GYN scanning on Vinno systems. With a needle guide attached, it supports ultrasound-guided interventions such as liver and renal core biopsies, fluid aspirations, and drainage placements, where the operator follows the needle in real time along the projected guideline. A correctly fitted guide shortens needle-placement time compared with freehand technique and keeps the needle within the imaging plane, which matters most for deep targets reached through a convex probe.
Specification of the Akicare guide for the A2-5C
| Item | Specification |
|---|---|
| Type | Reusable needle guide bracket |
| Material | Medical-grade stainless steel |
| Guide model | Akicare JSM-050 |
| Needle angle positions | Three selectable angles |
| Needle gauge | 11–23G |
| Compatible probes | Vinno A2-5C, F2-5C, F2-5CE (shared housing) |
| Sterilisation | Steam autoclave or high-level disinfection per facility protocol |
Reusable vs. Disposable Needle Guides
Both formats position the needle along a predefined path shown as an on-screen guideline. The practical differences are cost structure and reprocessing workload.
| Factor | Reusable stainless steel guide | Disposable guide |
|---|---|---|
| Material | Medical-grade stainless steel | Plastic, usually with a single-use needle insert |
| Supplied condition | Non-sterile; sterilised on site before each use | Sterile, individually packed |
| Reprocessing | Cleaning followed by steam autoclaving or high-level disinfection, per your facility protocol | None; discarded after one procedure |
| Service life | Repeated sterilisation cycles over years of use | One procedure |
| Cost per procedure | Low after initial purchase | Recurring cost on every case |
| Best suited to | Departments with steady biopsy volume and an established sterilisation workflow | Sites without reprocessing capacity, or occasional use |
In both cases the probe itself is covered with a sterile sheath during the procedure; the guide clamps over the sheathed probe and holds the needle at the angle encoded in the ultrasound system’s biopsy software.
What to Check Before Ordering
- Exact probe model. Needle guide brackets are machined to the housing of a specific transducer. A guide for a similar-looking Vinno probe will not necessarily lock onto the A2-5C; confirm the model printed on the probe body, not just the system name.
- Needle gauge range. Verify that the guide accepts the needle sizes your protocols use. The Akicare guide for the A2-5C accepts 11–23G needles.
- Guideline software. The ultrasound system must display the biopsy guideline for this probe. Check that the biopsy function is enabled in the system presets before the first case.
- Sterilisation method. Match the guide type (reusable vs. disposable) to the reprocessing capacity of your department.
- Documentation. Ask the supplier for material and inspection documentation for your procurement records.
Vinno Guides in the Akicare Range
The Akicare catalogue covers the A2-5C directly: guide model JSM-050 is listed for the Vinno F2-5C, F2-5CE and A2-5C, which share a housing. The corresponding product page is the Vinno JSM-050 biopsy guide. A second Vinno bracket, the F4-12L linear guide, is also stocked, and the complete brand-by-brand coverage is published in the Akicare reusable biopsy guide list (PDF). You can also browse all Vinno-compatible products or the full biopsy guide category.
All Akicare guides are compatible aftermarket products. They are not manufactured by or affiliated with Vinno; brand and model names are used for compatibility reference only.
Request a Quote
Akicare supplies reusable biopsy needle guides and aftermarket-compatible ultrasound probes directly from our facility in Shenzhen, China, with worldwide shipping. Every item is inspected and tested before dispatch. To confirm fitment or request current pricing, email kevin@akicare.com.cn, message us on WhatsApp at +86 136 2236 3037, or browse the full biopsy guide catalogue and send an enquiry from the product page. Include your probe model and, if possible, a photo of the probe head so we can verify bracket compatibility before you order.
Vinno A2-5C biopsy guide: current evidence update
Answer first: A Vinno A2-5C biopsy guide should be selected only after the exact probe label and suffix are matched to the guide manufacturer and reference, current compatibility document, attachment method, documented needle range, included parts, single-use or reusable status, and written quotation. A similar photograph or shortened title is not proof of fit.
| Field | Evidence | Control |
|---|---|---|
| Probe label | Full model, suffix and part number | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
| Guide reference | Manufacturer and every visible marking | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
| Fit evidence | Current compatibility chart or IFU | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
| Needle field | Documented range, angle or path for the exact guide | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
| Use status | Single-use, sterile or reusable from labeling | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
| Reprocessing | Current validated instructions when reusable | Keep this field tied to the exact Vinno A2-5C biopsy guide request. |
Why this page is different from a product listing
The article explains how to evaluate the request and routes readers to current catalogue records. A product or category page owns the commercial inventory intent. This article should not compete by repeating a long list of unverified models; it adds decision evidence, limitations and an RFQ workflow that a product card cannot provide.
Model and configuration boundaries
This is a purchasing and documentation guide, not a clinical procedure. Do not infer needle choice, insertion, angle or patient suitability from the supplier page. Those decisions belong to the approved labeling, facility process and qualified users.
Keep general documentation separate from item-level proof. A source can explain terminology or testing boundaries, while the physical label, current photos, inspection record and quotation establish facts about the exact item. Mark unresolved fields pending instead of copying a specification or compatibility statement from a similar model.
Four-step review
- Capture complete labels and all relevant physical interfaces.
- Check the exact current document or written match basis.
- Separate catalogue discovery from item condition and test evidence.
- Approve only a quotation that repeats the identity, scope, exclusions and terms.
Related catalogue and service links
- Vinno JSM-050 F2-5C guide
- Vinno biopsy guide catalogue
- Relevant Akicare destination
- Supplier evidence checklist
Frequently asked questions
Does the model phrase alone prove the correct Vinno A2-5C biopsy guide?
No. Verify the complete labels, physical interface and current configuration-specific evidence.
Can a catalogue image prove condition?
No. Request current photos tied to the quoted item or service record.
What should the written quote identify?
Exact identity, compatibility basis, condition, evidence, included items, availability basis, shipping responsibility and remedy terms.
Sources
Evidence update checked 3 August 2026. Use current exact documentation for the device and jurisdiction involved.