Siemens (Acuson) P8-3 Phased Array Ultrasound Probe

This record pairs the Siemens (Acuson) P8-3 phased array probe with the Siemens Sonoline Elegra system, placing it within the Siemens / Acuson Probes catalogue section alongside related transducers such as the P5-1. The entry lists two condition options: Compatible-New, meaning a new aftermarket-compatible unit, and a repair capability for the original Siemens (Acuson) P8-3 transducer. Each option is quoted individually, and the catalogue shows the compatible brand, probe model, array type and compatible system without implying universal fit beyond the listed site data.

The P8-3 is not manufactured by or affiliated with Siemens (Acuson); brand and model names appear for compatibility reference only. For procurement teams and imaging engineers, this record clarifies which system family the probe targets, while commercial specifics such as warranty cover, test scope, availability, timing and shipping are settled case by case after contact. Because each unit and repair job differs, the quotation confirms the exact condition and terms for the requested model.

This record sits beside the Siemens / Acuson Probes category, which also includes the Siemens (Acuson) P5-1 Phased Array Ultrasound Probe for comparison.

Frequently asked questions

In practice, what warranty terms do you offer on the P8-3 probe?

Warranty cover is not stated in this catalogue record. It is agreed individually per order, after we know if your team needs a new aftermarket-compatible unit or a repair of your original P8-3. Send your enquiry and the quotation will confirm the cover for that specific unit.

Which system does this P8-3 work with?

The site data lists the Siemens Sonoline Elegra as the compatible system. If your equipment is a variant of that platform, mention the full system name and software version in your enquiry so the quotation can confirm the pairing for your exact configuration.

Should I include connector details when asking about this probe?

Yes. State the connector type and the number of pins visible on your Elegra system, plus any labelling on the probe face, such as the serial and part numbers. That information helps confirm whether a new aftermarket unit or a repair service suits your existing setup.

What is the difference between the two condition options for this item?

Compatible-New means a newly built aftermarket-compatible P8-3 probe. The other option is a repair service for your original Siemens (Acuson) P8-3 transducer. The catalogue lists both, but the quotation states which condition applies to your requested unit and any agreed examination scope.