Mindray SP5-1U Phased Array Ultrasound Probe

This Mindray SP5-1U phased array probe pairs with the Mindray Resona 7 system, keeping the transducer interface and footprint consistent with that platform. As a new aftermarket-compatible unit, it is intended to function as a replacement for the original SP5-1U, but its connector, acoustic lens, and housing markings should be compared against the existing probe fitting on your Resona 7 before commitment. This catalogue entry lists the probe model, array type, compatible system, and condition options only.

The unit is offered in two states: new aftermarket-compatible, or as a repair cover for the original Mindray SP5-1U transducer. Neither state implies a universal fit across other Resona models or Mindray consoles. Since the probe is not manufactured by Mindray, its labelling will differ from the original. Confirm the connector type, cable length, and element count from the physical unit itself, as those details are not specified here.

For a different footprint on the same platform family, see the related listing for Phased Array Probes and Mindray SP5-1NS Phased Array Ultrasound Probe.

Frequently asked questions

About terms: what after-sales support do you provide for this SP5-1U after I place an order?

After-sales support for this item is handled on a per-order basis, never promised in the catalogue. The final terms depend on unit condition, your location, and the specific verification both parties accept. Return arrangements and carriage are also factored into that individual agreement.

Practically speaking, how does this SP5-1U differ from the SP5-1NS listing shown alongside it?

This listing is for the SP5-1U, which is compatible with the Mindray Resona 7. The sibling listing is for the SP5-1NS, a separate phased array model. Each has its own connector and system pairing, so check the probe model marking on your transducer before selecting either record.

Which connector and labelling details should I check on my existing probe before sending an enquiry?

Look at the probe model number printed on the connector housing or cable strain relief. Also note the connector pin count and the shape of the locking latch. Compare these against the SP5-1U physical unit you receive, as aftermarket parts may show a different label style from the original Mindray part.

What should I include in my enquiry about this probe to get a precise response?

State the Mindray Resona 7 system software version, the current probe model and serial number, and whether the purchase should be a new unit or a repair. Add a photo of the connector and the label area. This gives us enough detail to confirm fit and discuss delivery and trade terms.