Toshiba PST-25AT Phased Array Ultrasound Probe

When your Toshiba Aplio 50 (SSA-700A) needs a phased array probe and the original unit is beyond economic repair, this catalogue entry maps the PST-25AT replacement path. The compatible-New listing covers a new aftermarket-compatible PST-25AT transducer, while a separate repair service exists for your existing Toshiba unit. You will see the array type, compatible brand and host system stated plainly, so procurement can match the part number against the installed base before sending an enquiry.

The listing does not itself settle test scope, delivery timing or warranty terms. Those are agreed case by case after contact, because each order differs by unit condition and the host system involved. For a new aftermarket-compatible probe or a repair of the original, confirm the exact scope of inspection, availability and shipping with Akicare for your specific Aplio 50 configuration before raising a purchase order.

For sourcing decisions, this PST-25AT entry sits alongside the Canon / Toshiba Probes category, and you can compare it with the Toshiba PST-20CT Phased Array Ultrasound Probe listed on the same catalogue.

Frequently asked questions

What does the warranty cover on this PST-25AT order?

The catalogue shows the condition options and the compatible system, but warranty cover is not a fixed catalogue term. Each order settles warranty scope individually, depending on whether you buy the new aftermarket-compatible probe or request a repair of your existing Toshiba unit. Ask for the warranty detail in your quotation.

Will this probe suit my Aplio 50 for cardiac or abdominal work?

The catalogue records the array type as phased array and lists the Toshiba Aplio 50 (SSA-700A) as the compatible system. No specific clinical application is recorded for the PST-25AT. Suitability for your intended scan type depends on the probe configuration and your department protocol, so raise that with Akicare before ordering.

Which connector and label details should I check for this model?

Confirm the connector on your Aplio 50 matches the PST-25AT as fitted to the exact host unit, because probe connectors vary by system revision. Also verify the probe serial and model label on your existing transducer against the PST-25AT designation, and request a photograph of the replacement unit if you need it prior to commitment.